Highlights
- Four auto-tracking beamforming beams follow active talkers across the room for more consistent voice pickup.
- Yamaha audio processing combines echo cancellation, noise reduction, dereverberation, automatic mixing, and automatic gain control for a managed room-audio signal.
- Dante networking carries the microphone audio and AEC reference signal through the room AV network.
- Ceiling, wire, and VESA mounting options support different architectural and installation requirements.
- The RM-CG platform can scale to as many as 14 RM-CG devices with an RM-CR processor, or up to 16 without VXL1-16P speakers.
- White finish integrates cleanly into many ceiling installations while keeping microphones off the conference table.
Ideal For
- Medium conference rooms for approximately 10–20 people
- Large conference rooms and divisible professional meeting spaces
- Classrooms, lecture halls, and seminar environments
- ADECIA ceiling-audio installations requiring Dante network integration
Resources
Yamaha RM-CG-W ADECIA Dante Ceiling Array Microphone – White
The Yamaha RM-CG-W is a white ceiling array microphone for professional conference rooms, classrooms, lecture spaces, and seminar environments. Its four auto-tracking beamforming beams and Yamaha signal processing capture voices without requiring participants to speak toward a tabletop microphone, while Dante networking supports integration with a larger room-audio system.
It is best suited to medium rooms of approximately 10–20 people as well as larger conference and education spaces where ceiling placement and flexible coverage are valuable. This is a standalone microphone, not a complete conferencing system, so a full ADECIA deployment typically also requires the RM-CR processor, PoE/Dante networking, speakers, room computer, camera, and room control components.
Yamaha ADECIA Conference Room Audio Solution - White Ceiling Microphone (single, stand-alone)
Platform Compatibility
- Certification evidence applies to the ADECIA ceiling configuration, not RM-CG-W operating as a complete standalone Teams endpoint.
- The documented certified setup is the complete ADECIA ceiling solution rather than the microphone alone.
Key Specifications
- Audio format: 48 kHz sampling rate, 24-bit resolution
- Beamforming: Four auto-tracking beams with Multi Beam Tracking
- Audio processing: Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, and Output Gain Adjustment
- Dante audio I/O: 1 input / 2 outputs; input 1 is the AEC reference signal, output 1 is the beam mix, and output 2 is a simply processed beam mix
- Frequency response: 160 Hz–16 kHz (-10 dB)
- Latency: 58 ms including signal processing; 22 ms in low-latency mode
- Maximum input level: 117.8 dB SPL at 0 dBFS
- Dynamic range: 118.6 dBA; signal-to-noise ratio: 94.8 dBA
- Network connection: RJ45 Ethernet for Dante, remote control, WebUI, and PoE
- Power: PoE, IEEE 802.3af; maximum power consumption 7.2 W
- Required network cable: Cat 5e or higher, shielded twisted pair
- Mounting: Ceiling mount, wire mount, and VESA mount
- Environmental ratings: IP5X and UL2043 with terminal cover
- Operating temperature: 0°C–40°C; operating humidity: 30%–90%, no condensation
- Dimensions: W560 × D560 × H90 mm, including a 22 mm protrusion/microphone panel
- Product weight: 5.6 kg
- Color: White
What's Included
- White microphone unit
- Grille and grille installation hardware
- C ring and C-ring installation hardware
- Hanger angle and installation hardware
- Terminal cover
- Safety wire, binding band, and clamp plates
- Cutting template
Compatibility
- Meeting and collaboration platforms: The broader ADECIA ceiling configuration is needed for Zoom Rooms and Microsoft Teams; RM-CG-W itself is not a standalone native conferencing appliance.
- AV and room-system integration: Designed to integrate with the ADECIA RM-CR processor and Dante-based room-audio systems.
- Network protocols and connectivity: Dante, remote control, and WebUI operate over the RJ45 Ethernet network connection.
- Required supporting hardware: A complete ADECIA ceiling solution typically includes an RM-CR processor, VXL1-16P speakers, a PoE/Dante switch such as the SWR2311P-10G, camera, room controller, and PC.
- Cabling and power: Provide Cat 5e or higher shielded twisted-pair cabling and IEEE 802.3af PoE.
- Management tools: RM-CG Device Manager/WebUI, RM Device Finder, ProVisionaire Design, and ProVisionaire Control PLUS/Kiosk workflows can be used for configuration and management.
Licensing, Warranty & Support
The microphone is managed through Yamaha software and network tools rather than by a direct USB connection to a computer. A specific standard US warranty duration was not verified; we can help confirm the warranty and available support terms for your purchase. Yamaha lists current RM-CG and ADECIA firmware updates, including version 3.0.1, for ongoing device management.
VideoConferenceGear.com Assistance
We can help validate whether the RM-CG-W fits your room, ceiling, acoustics, and participant count; confirm the required RM-CR, Dante/PoE, speaker, camera, room-computer, controller, and platform components; and coordinate accessory selection, nationwide installation, multi-location deployment, and ongoing support.
Common Questions
Is the RM-CG-W a complete conference-room system?
No. It is a standalone white ceiling array microphone. A complete ADECIA ceiling deployment typically adds the RM-CR processor, PoE/Dante switch, VXL1-16P speakers, camera, room controller, and PC.
Does the microphone connect directly to a computer by USB?
No direct USB conferencing connection is identified for this microphone. It connects over RJ45 Ethernet using Dante and PoE, with the RM-CR processor normally bridging the room audio to the conferencing computer or system.
What room size is appropriate for one RM-CG-W?
Yamaha identifies the RM-CG for medium rooms of approximately 10–20 people as well as larger conference rooms, classrooms, lecture halls, and seminar spaces. Actual coverage depends on ceiling height, placement, acoustics, tuning, and the number of microphones used.
Can the microphone be installed in different ceiling configurations?
Yes. Ceiling mount, wire mount, and VESA mount options are supported, and the package includes the listed installation hardware such as the grille, C ring, hanger angle, terminal cover, safety wire, and clamp plates.
Does the RM-CG-W require a recurring subscription?
No recurring subscription is required for the RM-CG-W hardware. Conferencing-platform subscriptions or optional services for the complete room system are separate and depend on the chosen deployment.
Product Videos
Custom Field
Product Reviews
Cloud Connextions Nationwide Services - Design, Installation & Support - A Partner You can Trust
Cloud Connextions specializes in delivering next-generation office technologies, including physical security, video conferencing, and ProAV solutions. As a valued partner for the design, integration, and support of these systems, we work with industry leaders like Verkada, Zoom, AVer, Crestron, Poly, and more. Our team ensures you receive top-quality products and seamless service. VideoConferenceGear.com is our trusted online source, where you’ll find rigorously tested products backed by our extensive expertise in creating customized technology solutions for modern office environments.
